Your shore power cord is your yacht’s lifeline to reliable electricity. Improper storage or neglect can cause dangerous failures.

Inspection Checklist

• Check connectors for corrosion or burns
• Look for cuts or abrasions along the cable
• Test continuity with a multimeter
• Verify secure strain relief at the plug ends

Proper Storage

• Always coil your cord loosely—tight coils can damage insulation.
• Store in a dry, ventilated compartment.
• Use cord bags or reels to prevent kinks.

Cleaning Tips

• Rinse with fresh water to remove salt.
• Dry thoroughly before storage.
• Apply dielectric grease to terminals for corrosion prevention.

Load Awareness
Never exceed the rated capacity. Even heavy-duty cords can overheat if overloaded.

ANG Marine Cords
ANG marine shore cords are built with:

• Heavy-gauge copper conductors
• Double-insulated jackets
• UL and CE certification
• IP67 waterproof connectors

Tip:
Replace cords showing signs of wear—your safety depends on them.